A-A-55518/3C
TABLE I. Characteristics.
CID dash
Number of
Dimension A
number
poles
(see figure 1)
AA55518/03-
001
1
.78 (19.8)
002
2
1.69 (42.9)
003
4
3.50 (88.9)
004
9
8.03 (204.0)
NOTES.
PIN. The PIN should be used for Government purposes to buy commercial products to this CID
specification sheet. See the classification section for PIN format example.
Source of document.
FEDERAL SPECIFICATIONS
-
Clip Electrical, Fuse, 30 to 60 Ampere for Fuse Diameters 1/4 Inch Thru
13/16 Inch.
(Copies of this document is available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
Commercial products. As part of the market analysis and research effort, this CID specification sheet
was coordinated with the following manufacturers of commercial products. At the time of CID
specification sheet preparation and coordination, these manufacturers were known to have commercial
products that would meet the requirements of this CID specification sheet. (NOTE: This information
should not be considered as a list of approved manufacturers or be used to restrict procurement to only
the manufacturers shown.)
MFR's CAGE
MFR's name and address
71400
Cooper Bussmann, Incorporated
P. O. Box 14460
St. Louis, MO 63178-4460
Phone number (636) 394-2877
Facsimile number (800) 544-2570
E-mail: mailto:fusebox@buss.com
Uniform Resource Locator (URL): https://www.bussmann.com
3