MIL-PRF-15160/6E
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Case: Plastic or ceramic tube
Ferrule: Brass, copper, or copper alloy.
Finish: Nickel, bright alloy plate, or silver when specified.
Terminal strength: Method 211 of MIL-STD-202, test condition E, 2 inch-pound torque between ferrules and fuse
body.
Electrical:
Current rating: See table I.
Voltage rating: See table I.
Characteristic: See table I.
Overload interrupt: Maximum 1 hour at 135 percent of rated current.
Short circuit interrupt: Minimum or 10,000 amperes at rated voltage dc.
Type designation: Type designation shall be as specified in table I.
TABLE I. Type designation. 1/
Style
Characteristic
Voltage
Current
F06
A
250 V
1A
F06
A
250 V
2A
A
F06
250 V
3A
A
F06
250 V
5A
A
F06
250 V
10 A
F06
A
250 V
15 A
1/ For silver plated terminals, the designator "S" is added after the current rating.
VERIFICATION:
Qualification inspection: First article in accordance with table III of MIL-PRF-15160 for 1, 2, and 3 ampere current
ratings only.
Conformance inspection: Group A and B inspections of MIL-PRF-15160 for 1, 2, and 3 ampere current ratings
only.
2