MIL-PRF-15160/7F
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Physical:
Terminals: Ferrule type.
Material: Brass, copper, bronze, or copper alloy.
Finish: Nickel, or silver plated when specified.
Strength: Method 211 of MIL-STD-202, test condition E, 10 inch-pound torque between ferrules
and fuse body.
Body: Glass tube.
Electrical:
Current rating: See table I.
Voltage rating: See table I.
Characteristic: See table I.
Overload interrupt:
Characteristic A: Maximum 1 hour at 135 percent of rated current.
Characteristic B: Maximum 1 hour at 135 percent of rated current, and minimum of 12 seconds
at 200 percent.
Short circuit interrupt: Minimum of 10,000 amperes at rated voltage.
Type designation: Type designation shall be as specified in table I.
VERIFICATION:
Qualification inspection is not applicable to this specification sheet and shall be replaced by
acceptance testing consisting of Group A and Group B inspections per MIL-PRF-15160, prior to delivery.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business