MIL-PRF-19207/10F
REQUIREMENTS:
Cap and body molding material: Cap and body molding materials shall be selected to enable the fuseholder to
meet the performance requirements of this specification. Additional information and guidance on body molding
material are specified in the notes.
Fuse accommodation:
Ferrule type:
Size: .281 inch diameter, 1.250 inch length.
Style: F06: MIL-PRF-15160/6.
(or equivalent size and style)
Poles: One.
Rating: 15 amperes, 250 volts maximum.
Panel thickness: .187 inch maximum.
Gaskets and o-rings shall be used that enable the fuseholder to meet the performance requirements of this
specification. Additional information and guidance on gaskets and o-rings are specified in the notes.
Nonindicating:
Lamp series resistor: None.
Terminals: Solder lug type.
Enclosure:
FHN19G: Dripproof.
FHN19W: Watertight.
Test fuses:
Temperature rise: F06A250V15A of MIL-PRF-15160/6.
Short circuit: F06A250V15A of MIL-PRF-15160/6. Short circuit test shall be made at 10,000 amperes,125
volts, 60 Hz and 200 amperes, 250 volts, 60 Hz.
Mechanical shock: Method II of MIL-PRF-19207.
Terminal strength: 5 pounds.
Torque: Mounting - 30 inch-pounds.
Cap insert (FHN19W only) - 15 inch-pounds.
Salt spray (corrosion): Test condition B.
Part or Identifying Number (PIN): FHN19G or FHN19W depending on type.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business