W-F-1814-SUP-2 Fuses, Cartridge, High-Interrupting CapacityThis specification covers the general requirements and test procedures for current-limiting and noncurrent-limiting, nonrenewable, cartridge fuses with interrupting capacity ratings of 100,000 or 200,000 rms symmetrical amperes see 3.1 and 6.1.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14

W-F-1814D

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-202       -      Test Methods for Electronic and Electrical Component Parts.

(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or https://assist.dla.mil or from DLA Document Services, Building 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094).

2.3  Non-Government publications.  The following documents form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see

6.2).

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

ASTM B16/B16M         -           Standard Specification for Free-Cutting Rod Brass, Bar and Shapes for Use in Screw Machines.

ASTM B36/B36M         -           Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar.

ASTM B121/B121M     -           Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar. ASTM B124/B 124M    -           Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and

Shapes.

ASTM B139/B 139M    -           Standard Specification for Phosphor Bronze Rod, Bar, and Shapes. ASTM B152/B152M     -           Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar. ASTM D710                 -           Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes used

for Electrical Insulation.

ASTM B700                              Standard Specification for Electrodeposited Coatings of Silver for

Engineering use.

(Copies of these documents are available online at https://www.astm.org or from the American Society for Testing

Materials International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken,  PA  19428-2959).

INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)

ISO 10012                   -           Measurement, Management Systems - Requirements for Measurement

Processes and Measuring Equipment.

(Copies of this document are available online at https://www.iso.org/iso/home.html or from the American National

Standards Institute (ANSI), 1899 L Street, NW, 11th Floor, Washington, DC  20036-3804).

NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)

NCSL Z540.3               -           Calibration of Measuring and Test Equipment, Requirements for.

(Copies of this document are available online at https://www.ncsli.org/ or from the National Conference of Standards

Laboratories, 2995 Wilderness Place, Suite 107, Boulder, CO  80301-5404.)

UNDERWRITERS LABORATORIES INC. (UL) STANDARDS

UL 248-1             -          UL Standard for Safety for Low-Voltage Fuses - Part 1:  General Requirements. UL 248-5             -          UL Standard for Safety for Low Voltage Fuses - Part 5:  Class G Fuses.

UL 248-8             -          UL Standard for Safety for Low Voltage Fuses - Part 8:  Class J Fuses. UL 248-9             -          UL Standard for Safety for Low-Voltage Fuses - Part 9:  Class K Fuses. UL 248-10           -          UL Standard for Safety for Low Voltage Fuses - Part 10:  Class L Fuses.

UL 248-12           -          UL Standard for Safety for Low-Voltage Fuses - Part 12:  Class R Fuses. UL 4248-1           -          UL Standard for Safety for Fuseholders - Part 1: General Requirements.

(Copies of these documents are available online at https://www.ul.com or from the Underwriters Laboratories

Incorporated, 2600 N. W. Lake Road, Camas, WA 98607-8542).

2