MIL-PRF-15160/10H
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Body: Fiber tube.
Ferrule: Brass, copper, or copper alloy.
Finish: Nickel, or silver plated when specified.
Contact:
Characteristic A Red button or tip.
Characteristic B Silver plated button or tip.
Spring Phosphor bronze, or corrosion-resistant steel.
Terminal strength: Method 211 of MIL-STD-202, test condition E, 2 inch-pound torque between
ferrules and fuse body.
Electrical:
Current rating: See table I.
Voltage rating: See table I.
Characteristic: See table I.
Overload interrupt:
Characteristic A - Within 1 hour at 135 percent of rated current.
Characteristic B - Maximum within 1 hour at 135 percent of rated current, and a minimum of 12
seconds at 200 percent.
Short circuit ac interrupt: 1,000 amperes.
Type designation: Type designation shall be as specified in table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business