MIL-PRF-19207/38E
Poles: Two.
Rating: 15 amperes, 125 volts.
Panel thickness: .125 inch (3.18 mm) maximum.
Indicating: Polycarbonate lens neon lamp.
Lamp series resistor: MIL-PRF-39017/1, 120,000 ohms.
Fuse carrier: The spring constant for the switch spring shall be such that a force of 0.56 ounce is required to
compress the spring .045 inch (1.14 mm).
Terminals: Stud type, No. 8-32UNC-2A thread. Brass, silver, or tin-plated. Solder type, brass, silver plated.
Test fuses:
Temperature rise: F77A125V15A of MIL-PRF-15160/77 or equivalent.
Short circuit:
F77A125V15A of MIL-PRF-15160/77 or equivalent.
Mechanical shock: Method I of MIL-PRF-19207. Momentary opening of indicating circuit contacts permitted.
Terminal strength:
20 pounds (stud terminals).
5 pounds (solder terminal).
Torque: Terminals - 15 inch-pounds.
Salt spray (corrosion): Test condition B.
Part or Identifying Number (PIN): FHL57G-001 for body.
FHL57G-002 for fuse carrier.
Referenced documents. In addition to MIL-PRF-19207, this document references the following:
The margins of this specification are marked with vertical lines to indicate where changes from the previous issue
were made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document
based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business