MIL-PRF-19207/7N
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Cap and body molding material: Cap and body molding materials shall be selected to enable the fuseholder to
meet the performance requirements of this specification. Additional information and guidance on body molding
material are specified in the notes.
Fuse accommodation: MIL-PRF-15160, styles F20 and F64 (or equivalent size and styles).
Poles: One
Rating: 101-200 amperes, 90-500 volts.
Panel thickness: 0.250 inch (6.35 mm) maximum.
Indicating: Neon lamp with clear cap.
Lamp series resistor: MIL-PRF-39017/2, two resistors, 160,000 ohms, 0. 5 watt.
One each lamp lead.
Terminals: Stud type, .375-16UNC-2A thread.
Enclosure: Dripproof.
Test fuses:
Temperature rise: F64C500V200A of MIL-PRF-15160/64.
Short circuit:
F64C500V200A of MIL-PRF-15160/64.
Mechanical shock: Method I of MIL-PRF-19207.
Terminal strength: 20 pounds.
Fuse clip retention force:
Lower clip: 5 to 7 pounds.
Cap clip: 13 to 15 pounds.
Salt atmosphere (corrosion): Test condition B.
Mounting hardware:
Screw:
.3125-18UNC-2A, truss head, 3 inches long (min) with sealing washer.
Nut:
.3125-18UNC-2B Hex. A threaded metal insert may be used in lieu of nut.
Part or Identifying Number (PIN): FHL16G-001.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business