MIL-PRF-19207/8H
Ferrule type:
Size: 0.250 inch (6.35 mm) diameter, 1.250 inch (31.75 mm) length.
(or equivalent size and styles)
Poles: One
Rating: 30 amperes, 90-250 volts.
Panel thickness: 0.187 inch (3.18 mm) maximum.
Gaskets: Gaskets shall be used that enable the fuseholder to meet the performance requirements of this
specification. Additional information and guidance on gaskets are specified in the notes.
Indicating type: Neon lamp with clear cap.
Lamp series resistor: MIL-PRF-39017/2, 120,000 ohms, 0.5 watt.
Terminals: Solder lug type.
Enclosure: Dripproof.
Test fuses:
Temperature rise: F03A125V20A of MIL-PRF-15160/3.
Short circuit:
F03A250V15A of MIL-PRF-15160/3.
Mechanical shock: Method II of MIL-PRF-19207.
Terminal strength: 5 pounds.
Torque: Mounting - 30 inch-pounds.
Salt atmosphere (corrosion): MIL-STD-202, method 101, test condition B.
Part or Identifying Number (PIN):
FHL17G1 or FHL17G2 depending on type.
Referenced documents. In addition to MIL-PRF-19207, this document references the following:
The margins of this specification are marked with vertical lines to indicate where changes from the previous issue
were made. This was done as a convenience only and the Government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document
based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business