MIL-PRF-23419/1L
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Applicable fuseholder: MIL-PRF-19207/26, type FHN42W.
Case material: Ceramic.
Terminals:
Material: Brass.
Finish: See table I.
Strength: 9 pounds.
Current rating, nominal: See table I.
Voltage rating: See table I.
Current carrying capacity: 100 percent (at all temperatures between -55°C and +85°C). Connecting
wire shall be #14 and fuseholders shall not be spaced closer than 1 inch (25.4 mm) apart.
Resistance: Not applicable.
Overload interrupt: See table I.
Short circuit interrupt: See table I.
Shock:
Method I for fuses rated 1/64A or less.
Method II for fuses rated more than 1/64A.
Thermal shock: Method 107 of MIL-STD-202, test condition B.
Characteristic: See table I.
Part or Identifying Number (PIN): The PIN is derived from table I and shall be as shown in table IV.
Marking: Fuses shall be legibly and permanently marked with the manufacturer's name or trademark
and PIN designation. Style, voltage and amperage may be applied in separate rows, if required by
space limitations or printing technique limitations.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business