W-F-1814/56D
Ltr |
Inches |
mm |
Ltr |
Inches |
mm |
||||
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
||
A |
1.970 |
2.030 |
50.04 |
51.56 |
H |
--- |
.150 |
--- |
3.81 |
B |
.500 |
--- |
12.70 |
--- |
J |
.026 |
.036 |
.66 |
.91 |
C |
.151 |
.161 |
3.84 |
4.09 |
K |
.850 |
--- |
21.59 |
--- |
D |
.085 |
.130 |
2.16 |
3.30 |
L |
--- |
.130 |
--- |
3.30 |
E |
--- |
.530 |
--- |
13.46 |
M |
.070 |
--- |
1.78 |
--- |
F |
.554 |
.570 |
14.07 |
14.48 |
N |
.151 |
.161 |
3.84 |
4.09 |
G |
--- |
.115 |
--- |
2.92 |
|||||
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Solid line indicates location, shape, and dimensions for minimum rejection groove.
4. Dashed line indicates location, shape, and dimensions for maximum rejection groove.
5. Unless otherwise specified, tolerances are ±.02 (0.51 mm) for two-place decimals and ±.005 (0.13 mm) for three-place decimals.
FIGURE 1. Classes RK1 and RK5 fuses, 250 volts, 0-30 amperes - continued.
REQUIREMENTS:
Interface and physical dimensions: See figure 1. Physical: Nonrenewable.
Terminals: Ferrule type. The ferrules shall be approximately circular in cross-section.
Material: Brass, copper, or copper alloy.
Strength: 5 inch-pound torque between body and ferrules.
Alignment: The inside diameter of tubular gauge shall be not more than .571 inch (14.50 mm). Body:
Insulating material: Fiber, ceramic, melamine-impregnated glass fiber, or other suitable material. Electrical:
Voltage: 250 volts or less. Frequency: 48 Hz to 60 Hz.
Current: See table I.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business