INCH-POUND
MIL-DTL-24646B
29 April 2008
SUPERSEDING
MIL-DTL-24646A
26 February 2001
DETAIL SPECIFICATION
FUSE BOXES, GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for fuse boxes with or without switches used on
Naval ships.
1.2 Part or Identifying Number (PIN). The PIN will consist of the following:
001
M24646/1-
Dash number
Designator and
(see 3.1)
specification sheet
number
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4 or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract (see 6.2).
FEDERAL SPECIFICATIONS
-
Brazing Alloys, Silver.
-
Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural
and Special Shaped Sections.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center,
Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, Ohio 43218-3990 or by email
CircuitProtect@dla.mil. Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5920
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business