MIL-DTL-24646B
4.4 Conformance inspection.
4.4.1 Inspection of product for delivery. Inspection of product for delivery shall consist of group A and group B
inspection. Samples shall be randomly selected in accordance with table IV. If one or more defects are found, the lot
shall be rescreened and defects removed. A new sample of parts shall be randomly selected in accordance with
table IV. If one or more defects are found in the second sample, the lot shall be rejected and shall not be supplied to
this specification.
4.4.1.1 Inspection lot. An inspection lot shall consist of fuse boxes of the same category (covered by a single
specification sheet (see 3.1)), produced under essentially the same conditions, and offered for inspection at one time.
4.4.2 Group A inspection. Group A inspection shall consist of the inspections as specified in table II.
TABLE II. Group A inspection.
Requirement
Test
Inspection
paragraph
paragraph
Visual and dimensional examination
Dielectric withstanding voltage
Insulation resistance
4.4.3 Group B inspection. Group B inspection shall consist of the inspections as specified in table III, in the order
shown with samples selected from inspection lots that have passed group A inspection.
TABLE III. Group B inspection.
Requirement
Test
Inspection
paragraph
paragraph
Effectiveness of enclosure
Magnetic permeability
(where applicable)
Operation
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business