MIL-PRF-15160/9G
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
Terminals: Ferrule type.
Material: Brass, copper, or copper alloy.
Finish: Nickel or bright alloy plate, silver plated when specified.
Strength: Method 211 of MIL-STD-202, test condition E, 2 inch-pound torque between ferrules and
fuse body.
Body: Fiber tube.
Electrical:
Current rating: See table I.
Voltage rating: See table I.
Characteristic: See table I.
Overload interrupt:
Characteristic A: Maximum 1 hour at 135 percent of rated current and a maximum of 2 minutes at
200 percent of rated current.
Characteristic B: 1/10A through 30A
Maximum 1 hour at 135 percent of rated current.
1/10A through 2 8/10A
Minimum of 5 seconds at 200 percent of rated current.
3 2/10A through 30A
Minimum of 12 seconds at 200 percent of rated current.
Short circuit interrupt: See table I.
Shock:
F09A 1A through 30A
Method 207 of MIL-STD-202 (HI shock)
F09B 1/10A through 1 6/10A
Method 213 of MIL-STD-202, test condition I
F09B 1 8/10A through 30A
Method 207 of MIL-STD-202 (HI shock)
Method 204 of MIL-STD-202, test condition A (except 5g
Vibration:
F09A 1A through 30A
peak)
Method 201 of MIL-STD-202
F09B 1/10A through 8/10A
F09B 1A through 30A
Method 204 of MIL-STD-202, test condition A (except 5g
peak)
Part or Identifying Number (PIN): The PIN shall be constructed from table I (e.g., F09A250V1A, or
F09B250V1/10A).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business