MIL-PRF-19207/20F
REQUIREMENTS:
Cap and body molding material: It is suggested that type MAI-60, GDI-30F or SDG-F of American Society for
Testing and Materials ASTM-D5948 be considered for meeting the cap and body molding material requirements of
this specification. ASTM-D3935 is also suggested as guidance for cap material.
Gaskets and O-rings: It is suggested that gaskets and O-rings that meet class 3 of A-A-59588 be considered for
use.
Fuse accommodation:
Ferrule type:
Size: .250 inch diameter, 1.00 inch length.
Style: F01: MIL-PRF-15160/1.
(or equivalent size and style)
Poles: One.
Rating: 5 amperes, 250 volts maximum.
Panel thickness: .187 inch maximum.
Nonindicating:
Lamp and series resistor: None.
Terminals: Solder lug type.
Enclosure: Dripproof.
Test fuses:
Temperature rise: F01A125V2A of MIL-PRF-15160/1.
Short circuit: F01A125V2A of MIL-PRF-15160/1.
Mechanical shock: Method II of MIL-PRF-19207.
Terminal strength: 5 pounds.
Torque:
Mounting: 20 inch-pounds.
Cap insert (FHN31G2 only): 15 inch-pounds.
Salt spray (corrosion): Test condition B.
Part or Identifying Number (PIN): FHN31G1 or FHN31G2 depending on type.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business