MIL-PRF-23419/2R
REQUIREMENTS:
Interface and physical dimensions: See figure 1.
MIL-PRF-19207/29, type FHL45G.
Terminals:
Material: Copper.
Finish: Bright alloy or tin plate.
Strength: 5 pounds force along terminal axis; 5 pounds force perpendicular to terminal axis at
base.
Current rating, nominal: See table I.
Voltage rating, maximum: 125 volts.
Current carrying capacity: 100 percent at +25°C; 110 percent at -55°C; 90 percent at +85°C. The
temperature of the case, body, or terminal shall, at no point, rise more than +70°C above the ambient
air temperature.
Resistance: Not applicable.
Overload interrupt: Percentage of nominal rating, interrupt time -55°C through +85°C, 200 percent in 0
to 10 seconds; 300 percent in 0 to 0.1 second.
Short circuit interrupt: See table I.
Shock: Method I, except PIN designation FM02A125V1/500A shall be tested in accordance with
method 213 of MIL-STD-202, test condition A.
Thermal shock: Method 107 of MIL-STD-202, test condition A.
Characteristic: See table I.
Part or Identifying Number (PIN): The PIN is derived from table I and shall be as shown in table IV.
Marking: Fuses shall be marked with the manufacturer's name or trademark, PIN designation, and
current rating only.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business